The company CIMTECH S.r.l. represents the SCADA system FlexCtrl in Italy.

The Moscow based company InSyst Ltd. represents BitCtrl Systems and the SCADA system FlexCtrl in Russia.

BitCtrl Systems developed the QNX driver for the CAN cards CANISA-DN and CAN104-DN produced by Contemporary Controls and offers these components as a package.

BitCtrl Systems developed the QNX driver for the UPS-Systems produced by EFFEKTA Regeltechnik GmbH and offers these as a package.

BitCtrl Systems developed the QNX driver for the Eltec Framegrabber Card PC Eye 4 and offers these two components as a package.

BitCtrl Systems developed QNX driver for Process-I/O Modules manufactured by ICP Deutschland GmbH and offers these components as a product package.

BitCtrl Systems developed QNX boot- and run-time software for the XScale Board Triton™ manufactured by Ka-Ro electronics GmbH. We offer the Board as well as the Starter Kit as product package.

BitCtrl Systems is a distribution partner with the company Lexmark. The inkjet and laser printers from Lexmark provide very good quality and a good price-performance ratio.

BitCtrl Systems developed QNX driver for the Radio Controlled Clock Cards DCF77 and GPS cards of the Meinberg company and offers both components as a package.

BitCtrl Systems developed a QNX driver for the CAN cards PC-ISA-CAN and PCCAN-PCI produced by PEAK-System Technik and offers these components as a package.

QNX Software Systems Ltd. (QSSL) from Canada is the producer of the real-time operating system of the same name. BitCtrl Systems is a direct distribution- and development partner with QSSL.

BitCtrl Systems developed a QNX driver for the Watchdog cards PWDOG1, PWDOG2, Watchdog1 and Watchdog2 manufactured by Quancom and offers them as a product package.

SW Datentechnik GmbH is a partner company of BitCtrl Systems.

AllTec Society for Automation and Communication uses the SCADA system FlexCtrl in their dams, waste treatment, city works, and other projects. They make use of the BitCtrl Systems data-logger IO-Flex telemonitoring system also.

ALSTOM Schorch Transformatoren GmbH, Mönchengladbach uses the SCADA system FlexCtrl for transformator monitoring (continual monitoring in the millisecond range to optimize the company management and to evaluate the remaining utilization time).

In the Heating Power station Klingenberg run by the Bewag Berlin works a large FlexCtrl SCADA system which is using approximately 10.000 process variables. The 25 process monitors supervise the heating and electricity stations. The process level is over many different process interfaces such as: Teleperm ME CS275, Teleperm XP, Profibus FMS, Mauell ME30, Mauell ME2015, IEC 870-5 and special serial drivers.

ENERElektronik GmbH is a specialist in building automation. The company uses FlexCtrl as a multifunctional control system with intersections to regulators of various manufacturers: Riccius + Stroschen, Samson, Sauter, Entec M-Bus, LON Regler, Profibus DP.

In the Braunschweig/Wolfenbüttel Technical College, FlexCtrl is used as a teaching tool and in research. Amonst other applications, a driver for QNX has been developed for the CAN card from the company I+ME Actia as a FlexCtrl add-on.

In the Georg Fisher Iron Refinery BitCtrl Systems has implemented a comprehensive solution of automations of individual technological sections using the SCADA system FlexCtrl and the GSQSG quality assurance. For the melting oven an energy management system has been developed.

The SCADA system FlexCtrl is utilizied at GIP Automation Heidelberg in different measuring systems such as concrete mixing works, human food and animal food production, and in the production of detergents.

The engineering firm Jurk in Mannheim uses the SCADA system FlexCtrl for telemonitoring in gas ditribution systems.

The Helmut Mauell company uses the SCADA system FlexCtrl at the energy provider RWE for telemonitoring of substations. The I/O Module ME30 from Mauell is direct over D1 or D2 radio modem and over fixed line.

Schulz Electrical Engineering from Visbek near Bremen uses the SCADA system FlexCtrl to control nearly 30.000 containers on conveyor belts over transponders in real-time.

Signalbau Huber, Unterensingen uses the SCADA system FlexCtrl in application of traffic control systems.

BitCtrl Systems is a cofounder of GESIS - the Society for the Promotion of the Software Industrie in Saxonia.

BitCtrl Systems is a logo-partner of the Software Zentrum Sachsen GmbH.